Garmin talk

Does anybody has a poi for land location

Hi guys,

sorry if this will another boring topic for you, but I need some help. My beloved 2597 LMT crashed during update - white screen on the loop and is not loading. So I had to search for another device and came up one from the ebay. Same 2597 LMT, just from different country.
There is where fun begins

Great news. The problem with 7.1.0, 7.1.1, and 7.1.2 is fixed. My Garmin fleet 670 now is seen by Garmin Express for map and software updates. Six days ago, I contacted Garmin by email with the problem and sent them my GarminDevice.xml file plus my Garmin Express log files. This may have prompted today's release of GE 7.1.3 which doesn't have published Release Notes yet.

So the wife wanted this unit when it was on sale after she saw my 65. The problem is i can't get the traffic to work. This is the second unit i got from Amazon. It tells me the receiver is disconnected top left of screen. I did all the updates except the Map. hit the traffic icon and it tells it wants smartphone link or traffic compatible cable. This is a lmt-s. What am i missing?

thanks

I have a problem with a traffic report of a delay (with a delay time of zero) that is persistent. It occurs when the Smartphone Link app is connected to my DriveSmart 51LMT-S and I am not actively navigating. My issue is the persistence of the tab on the right of the screen that says something e.g. “no delay, 5.2 miles away”.

Available again at theGPSstore.com for $99. (8/22/2020)

https://www.thegpsstore.com/Garmin-DriveLuxe-51-LMT-S-with-N...

Updating map STUCK at 26.2 complete.

Ping Gamin ok but no download data just sits there for last 30 min.

Gamin 3597
Still on downloading files hope I can start over since it has not started the install.

Don't want to unplug but looks like I'm stuck.

I've noticed lately that when choosing to replace the Proximity field, it doesen't replace it, just adds a new alert at the distance entered. I've been doing this for several years now for the RLC files and it always used to replace the default value.

Comments?

Garmin Express 7.1.2.0 is now available.

when I connect the 1490 to the car it powers on when power applied, shows the logo and copyright, then powers off with a flash and repeats that cycle.
If running on battery it does the same thing.
If connected to computer it gets to show the progress bar of going into mass storage mode then goes off.
Battery it 3.9V going to 3.8V when on.
It will not do a factory reset.

Just got a notification for updating to V 7.1.1.0 in Garmin Express and updated to latest one!

Please check your GE...

Hi, I tried to post this to the end of an older thread, but it did not appear, so I am starting a new thread. I am a new member.

Steve K.

* * * * *

First a little information about this situation.

I bought a new laptop with a 128GB SSD. Which means I have to use an external HDD for almost all the programs I want to install. First off I needed to learn how to set up my registry so new programs will install on the external HDD instead of the C: drive.

BaseCamp and MapSource are installed on the C:/drive.

I just did an update and now my Nuvi 765 will not respond to any touch.
However, ONCE it did respond when I touched Tools.
How do I fix this?

I have a RV 760LM and a Nuvi 1490LM. With the 1490, I am able to install the latest map (i.e. 2021.20) and reload the previous map (i.e. 2021.10) and select the map that I would like to use. I also have both JCV files installed. I do this to make sure that I have a functional backup in case there are problems with the latest map.

Hello all

I ran into battery not holding charge issue on my NuviCam second time. First time when it happened, I replaced the battery and it worked for few years and this battery is dying again.

I have a problem I can't figure out, I updated my gps's today, my nuvi 52 updated just fine, my dezi 560 updated fine.

After a road trip and the Drivesmart powered from the car, I went to download the gpx and the gpx files was broken up into 21 different files. It should be a single file. I also had my old Nuvi running simultaneously and it correctly had a single gpx for the trip. Further, at one point in the trip I noticed it said it lost satellite.

"How to create a portable map data set."

D3060330.JCV (832.0 MB) for CNNA 2021.20 Map Update

The file is in the native uncompressed state and needs no unzipping action.

https://mega.nz/file/mtwBxQ5Z#Nj3q09OFeS9y8BnERpopFYYbPiqGEf...