CN North America NT 2014.20 Available for Download

Updated both GPS's and also installed on 2 computers in about 1 1/2 hours.

Only problem I had, though it did not stop me from updating is that Map Updater 3.2.2 did not install properly and gave me an error message. Just ignored it and the downloads came down OK.

Errors in Map Updater:
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: garminmapupdater.exe
Problem Signature 02: 3.2.2.0
Problem Signature 03: 51082088
Problem Signature 04: Garmin.Cartography.DeviceInteraction
Problem Signature 05: 3.3.0.5
Problem Signature 06: 50eb2256
Problem Signature 07: 1c0
Problem Signature 08: c9
Problem Signature 09: System.AggregateException
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

I was under the impression that Express always runs in the background, and announces the availability of map updates. I saw today on this site that 2014.20 is available, but had not received this information from Express.

I connected my 1490T, via usb, and again expected Express to launch automatically. After about 5 minutes, I started Express manually. Only then did it load, and announce "update available".

I checked under Express "Settings", and "Launch Express when a Garmin device is plugged in" box is checked. What am I missing?

Roy

That Garmin Express has never worked properly.

and for map updates your better off using Garmin MapUpdater:

PC Version

http://download.garmin.com/lmu/GarminMapUpdater.exe

MAC version

http://download.garmin.com/lmu/GarminMapUpdater.dmg

Not on mine. On mine it says newest is 2013.40

So only 2 map updates behind then.

I tried to use it, but no joy. Saw that there was a map update, so I checked GE. It said yes there is, so I told it to update the GPS and install maps on computer.

When it finished, I did not have an start menu shortcut to Basecamp anymore, but had 2 for GE one to "Express" and one to "Garmin Express."

Removed GE, Downloaded and re-installed Basecamp, updated GPS and computer with mapupdater. All good now, but wasted 2 hours.

It's some sort of .NET error. Did it happen on both PCs? You can find out more about the error in the SetupLog.txt file located in the %appdata%\Garmin\Map Update\ folder.

Thanks for the MapUpdater link. Garmin Express failed for me on 3 different PCs (I've got a few to try out on my desk here at work ). When I used the link in your post, it worked flawlessly. Thanks!

I am downloading 20-40 now. seems to take a while. hope it goes thru. roadtrip to the south soon.

This latest download, for whatever reason, came through successfully to my Garmin faster than any download ever has before from that site.

Granted, they still have one of my local street names down the block listed incorrect, but still...

I have had generally good luck with GE since launch, but this map update has failed multiple times using GE. However, when I tried it on Map Updater it worked just fine.

The map itself in my area barely updated any roads and is still behind MapQuest which I don't understand.

Did see new Exit at MM 244 on I-55 in northern Illinois. About a year after the new exit was opened. Also MM 116 on I-80 Northern Illinois.(Par for the course.)

Michael

Just D/L mine and took about 40 minutes.

So far... so good.

Thanks.

Problems with Garmin Express. It's being reported that if you phone Garmin Support there is a general message about problems with map updates not completely properly when using Garmin Express. According to the message they hope to have the problem corrected today.

As always, Garmin MapUpdater remains the most trouble free method to update your maps.

I will most likely wait a few days on this one. This is the first update they have released that I am not looking for any specific corrections. Every problem I have reported over the last couple of years or have know about is fixed. At least from my perspective, 2014.20 should be like 2014.10 for my area.

Downloaded 2014.20 using MapUpdater without any problem.

I'm sure glad I got rid of that Garmin Express piece of crap!

downloading 2014.20 now. thru garmin map updater..

Had to use the old Map Install program to get it to say update available, but it downloaded and installed to PC and 660 in about 1.9 hrs.

After several failed attempts even after installing the latest Garmin Express, the Garmin tech said there were some issues with 1014.20 and wait till next week to install it.

That's what I'll do.

Wil

I noticed they added the new World Trade Center Freedom Tower on the new map. Looks Great!

If all possible at any cost. I try to avoid using applications that depend on either .NET or Java. These environments are used to create "quick and dirty" apps and typically will pull in lots of other unnecessary things when running. As the result, not just make your computer slow but also lots of errors.

Did the update with Mapupdater and no problems

It's some sort of .NET error. Did it happen on both PCs? You can find out more about the error in the SetupLog.txt file located in the %appdata%\Garmin\Map Update\ folder.[/quote]

Actually on my older machine MapUpdater installed without a hiccup. Both are running Windows 7.

I'll have to check for the file you suggested.

Thanks

You'll have to install to a SD card next. SD cards are dirt cheap these days.

Wil, did you [happen by chance to] ask the Garmin tech person you spoke with why 2014.20 was released knowing there are 'issues' that will be changed next week?

Updated the 3790, and the 775 via Map Updater 3.2.2 last night with no problems. Took 2½ hours for both units start to finish.

The last 2 map updates for my 260 and 1490 went quite well using Garmin Express !
This time no soap !
Just would not complete installation on my 1490 or my "new" 2595 !
Re-downloaded MapUpdater and very easily installed 2014.2 on all three units ! Two of them on the SD card ! Large JCV file works on both the newer models !
Just got to have a bit of patience !

Glad to see more speed limits for Ottawa area - previously mainly on the 400-series highways. Now most of the major streets/roads seem to be included.

400-series speed limits bit of a waste - speed limit on all of the is 100KPH.

Happy with update, via GE

DougJ

I downloaded the 2014.20 map and the full JCV file posted here and tried to install it into a 1390T but cannot get it to work after screwing around with it for over 4hrs.

I'm using a microSD card and under the Garmin folder, I made a folder called JCV and copied file here. In the GPS in system\JCV, I deleted 3 files in there. Rebooted the GPS and ran a simulation in Atlanta, GA but cannot get the junction view to display anything. Is this the correct file or am I doing something wrong? I searched everywhere on the Garmin USA site for the full JCV download links and for the life of me I can't find it anywhere. Can someone tell me where they hide them? Thanks in advance.

Update: I reloaded the new map and it shows in system\JCV a file D3153110A.JCV at 24,992KB, a D3153110A.sum and a D1279020A.sum at 1KB.

just finished installing the update using Garmin Express on my Zumo 350LM...took almost an hour and a half....also updated the firmware and Jill (USA Voice)

I was able to update latest map with Garmin Express (Mac version) at 10pm 8/22.

For starters you can delete the two .sum files in your JCV folder, they are diagnostics files and are not needed. The 24,992KB file you have in your system\JCV folder is the small one.

You can download the large JCV file(775MB) file here:
http://download.garmin.com/support/2014_20/NA/JV/D3060110A.J...

That JCV file is for the 2014.20 map. Copy that file onto your SD card in the Garmin\JCV folder.
Next, on your Nuvi, rename the D3153110A.JCV to D3153110A.OLDJCV.

Reboot the Nuvi and try a simulation route to see if the Full View Junction view now works. If it does work you can delete the D3153110A.OLDJCV from the Nuvi or back it up first before deleting after renaming it back to D3153110A,JCV.

If it does NOT work, rename the file back to D3153110A,JCV. on the Nuvi, and remove the SD card. You should have a working Junction View, although a reduced one.

I tried to Run the new map and it Failed..

Ok I found it but not quite as the file you suggested, though it still means nothing to me. Anyone make any sense of the following?

[2013-08-22 10:18:12 (UTC-04:00)] | Initializing Application
[2013-08-22 10:18:12 (UTC-04:00)] | Operating System: 601 Service Pack 1
[2013-08-22 10:18:12 (UTC-04:00)] | Version 3.2.2
[2013-08-22 10:18:12 (UTC-04:00)] | Language: English (Canada) (ENU)
[2013-08-22 10:18:12 (UTC-04:00)] | Running from: C:\
[2013-08-22 10:18:12 (UTC-04:00)] | Server set to: http://rmu.garmin.com/Rmu
[2013-08-22 10:18:12 (UTC-04:00)] | Available space on drive (MB): 738467
[2013-08-22 10:18:12 (UTC-04:00)] | Downloading EULA (Provider: Garmin, Lang: ENU)
[2013-08-22 10:18:12 (UTC-04:00)] | Downloading EULA (Provider: Navteq, Lang: ENU)
[2013-08-22 10:18:17 (UTC-04:00)] | Computer unlock codes:
QMBGT2RWMXLU9HMVLMRCQ87Y7, UKCTEDNEHWA2KT9GBJG2Y4CJC, HHMTS5WSX2LNSAZU3P696VS9D
[2013-08-22 10:18:18 (UTC-04:00)] | Is net connection available? True
[2013-08-22 10:18:21 (UTC-04:00)] | One device found...
[2013-08-22 10:18:25 (UTC-04:00)] | Update target set to nüvi 3790
[2013-08-22 10:18:25 (UTC-04:00)] | Unit Id: xxxxxxxxxx (I removed serial number)
[2013-08-22 10:18:25 (UTC-04:00)] | Free Space: 3013369856
[2013-08-22 10:18:25 (UTC-04:00)] | Maps: 006-D2338-13
[2013-08-22 10:18:25 (UTC-04:00)] | Unit Unlocks: 6HA3N4PNVSH22R68UAWKQ2LC5, N9YJZBSM93GEXXDKVSSPMANRU
[2013-08-22 10:18:25 (UTC-04:00)] | Device Software Part Number: 006-B1101-00
[2013-08-22 10:18:25 (UTC-04:00)] | Device Software Version: 500
[2013-08-22 10:18:25 (UTC-04:00)] | ERROR:
[2013-08-22 10:18:25 (UTC-04:00)] | A Task's exception(s) were not observed either by Waiting on the Task or accessing its Exception property. As a result, the unobserved exception was rethrown by the finalizer thread.
[2013-08-22 10:18:25 (UTC-04:00)] | At Void Finalize()
[2013-08-22 10:18:25 (UTC-04:00)] | at System.Threading.Tasks.TaskExceptionHolder.Finalize()
[2013-08-22 10:18:25 (UTC-04:00)] | Getting software updates for 3839680492
[2013-08-22 10:18:26 (UTC-04:00)] | Performing Protobuf request: http://omt.garmin.com/Rce/ProtobufApi/SoftwareUpdateService/...
[2013-08-22 10:18:28 (UTC-04:00)] | EulaControl loaded
[2013-08-22 10:18:28 (UTC-04:00)] | EulaControl displayed
[2013-08-22 10:18:28 (UTC-04:00)] | Approx. Bandwidth: 16220.016 Kb/s
[2013-08-22 10:18:28 (UTC-04:00)] |
Get available map updates request sent to server:
Ifix: 710353073
Language: ENU
Unit ID: 3839680492

[2013-08-22 10:18:29 (UTC-04:00)] |
Get available map updates response received:
Action Code: 100
Error Message:
Map Update Versions:

I understand the Mac version of Garmin Express works. The PC version is a pathetic piece of crap.

Updated my trusty old nuvi 660 and PC BaseCamp maps with no problem. For the last few updates, I've been installing maps to an SD card and renaming the files per the FAQ here. Plugging in the SD to my laptop's card reader is much faster than using the 660's slow USB 1.1 port.

Just have to update BaseCamp on one other PC.

The Mac version of GE does not allow for downloading for use of the map on the Mac. At all. And for me, Lifetime Map Updater did not work this time either until selecting to manually reinstall maps, where it downloaded and installed 2014.20

Downloaded 2014.20 using MapUpdater without any problem. Garmin 50LM.

LMU isn't saying anything is available, trusty Garmin WebUpdater isn't saying anything is available, MyGarmin sent me to GE, GE is doing something right now, I have no idea what though. Looks like it will be a late night.

I just downloaded 2014.20 with GE and it showed up on BaseCamp immediately with no further installation or intervention. This is with a MacBookPro.

Shall we call this progress?

I tried this already and cannot get the full JCV to work at all. I deleted the .sum files as you mentioned and it's still the same thing. But the small JCV works fine. So strange, maybe the D3060110A.JCV is not compatible with the 1390T. ...

Installed GE and updated the 2595 with no issues seen. Performed remove program afterwards as per usual until the next map update.

No issues to report updating my 3490/3790/765T under Garmin Express (v2.1.2) with my MacBook Pro.

It's always possible that something has changed making the large jcv not work in 1390s, but we'd need to hear this from multiple users before we can accept it.

A few thoughts:

-Is your large jcv 798,554KB in size? (Check both the computer download and the copy on SD.) Did you try deleting it and redownloading it in case it was a corrupt download? Do you "safely remove" or "eject" the SD card after transferring the large jcv to the card?

-You've said it already but can you confirm that the location of the large jcv on the SD card in in the \garmin\jcv\ folder? (I hate even suggestion this but a problem that's arisen causing JV failures in the past is naming the folder jvc rather than jcv.)

-Do you power down the nuvi and restart it when trying to use the large jcv? Maybe it's possible that without a reboot, the nuvi continues to look on the nuvi for the jcv file.

If you want to try a test, see what happens if you move your small default jcv file from the nuvi's jcv folder to the SD card's jcv folder. If you don't get Junction Views in this mode, then there may be a problem with the card's folders or the card itself.

It probably doesn't matter, but can you tell us if the 2014.20 map update was done to the SD card or if the map is internal to the nuvi?

Please--other 1390T owners: if you try the large jcv file with map update 2014.20, let us know if the large jcv works or doesn't work for you.

Test driving my 3597 with the 2014.20 maps. So far no issues. In the process of updating the 3490

Finally got the D3060110A.JCV file to work on the 1390T. I can't believe I wasted all this time on a bunch of corrupted files. I re-downloaded the file again for the 4th time and now it working and displays the Junction Views.

Craig and muell9K, thanks for all your help and for posting all the suggestions. I was doing all the correct steps as you guys mentioned.

and all downloaded fine it took about 1 hr and 10 min to download and install. But we took a trip to the coast and a funny thing happened I had 27 miles to go and was on a straight road and I got a recalculating voice after it was done recalculating
it said to continue on the road I was on lol so far its the only glich ive found

hopefully it will work for me.

Well, phooey! They have improved the "Routing" by making it worse!

2014.20 downloaded and installed correctly first time without difficulty - 2595LMT