Garmin 660 AUX Input

 

If I get an Auxiliary Input for my 660 and connect them via a 3.5mm to 3.5mm cable, i understand that i will be able to listen to my MP3's on my car speakers thru the 660.

my question is, will i also be able to use bluetooth this way?

i guess what i am trying to ask is if the AUX jack works for bluetooth too.

Yes

It will make phone calls come thru the vehicle's sound system if you connect your 660 to the vehicle audio system via an auxiliary input on the audio system - be it a built-in or added aux input.

--
*Keith* MacBook Pro *wifi iPad(2012) w/BadElf GPS & iPhone6 + Navigon*

.

Yes. I works on my Honda Element with a built in 3.5mm AUX jack.

Do you get feedback?

Do you get feedback?

--
Charley - Nuvi 350 - Bel STI Driver - Cobra 29 w/ wilson 1000 - AIM: asianfire -

.

Nope.

I have the audio out of my Zumo mount connected to the AUX in of the car radio. I can hear MP3s, nav prompts, and the phone calls over the car speakers.

Everyone says they can hear me fine, and I have no problems hearing them.

I do this all the time on my

I do this all the time on my Impala and have never had feedback. However, there is a big difference in audio levels, I have to turn my stereo way up to hear it.

--
Nuvi 1390T Charlotte, NC

It works

My 660 works well in my GMC Envoy. Never any feedback.

--
Garmin Nuvi 660

Volume

On my "Street Pilot 2820", besides the "Volume" control, there are different volume output levels for each of the following:
Voice
XM
MP3/Audible
Phone

There is also an "Audio Jack:" setting that can be switched between "Headphones" and "Line Out".

Also, if you are listening to an "Audible Books" item and something else audible happens (bluetooth call, Nav turn voice prompt) the Audible Books stops were it was interupted and resumes were it paused.

Sound works fine, no

Sound works fine, no feedback, no problems!

Wish

Wish I have an AUX IN in my 2000 Toyota Tundra.

add one

--
*Keith* MacBook Pro *wifi iPad(2012) w/BadElf GPS & iPhone6 + Navigon*

Quote: There is also an

Quote:

There is also an "Audio Jack:" setting that can be switched between "Headphones" and "Line Out".

On my 650, I didn't have to change any settings in maintenance mode and the sound is perfect coming through my truck's stereo system.

What a great sound !!

660 audio

I'm surprised to hear all the positive comments. When I try to operate my 660 through the car stereo fm , I get nothing but interference. Is it the hard wire connection that makes the difference? I don't have an input jack on my car stereo.

gusb

--
augie billitier I2,c330,660

Yes, hard-wiring makes all

Yes, hard-wiring makes all the difference; it eliminates the competing radio signal interference. If you have a cassette tape recorder in your car, an adapter for it works extremely well. If you don't have a tape player, as mentioned above, you can install an aux input or have it done -- I think someone mentioned paying $80 including installation.

As much as I thought I wanted/needed the FM transmitter, it is worthless on my car.

--
Nuvi 660 -- and not upgrading it or maps until Garmin fixes long-standing bugs/problems, and get maps to where they are much more current, AND corrected on a more timely basis when advised of mistakes.

This is what I used

gusb wrote:

I'm surprised to hear all the positive comments. When I try to operate my 660 through the car stereo fm , I get nothing but interference. Is it the hard wire connection that makes the difference? I don't have an input jack on my car stereo.

gusb

Nuvi650 - 2005 GMC Sierra 2500HD

This is what I used to add an aux input to my factory stereo:

http://www.crutchfieldcanada.com/P_I_E_GM12_AUXv2_Auxiliary_...

You also need an RCA cable from the input module to the GPS unit (attaches to the earphone jack)

It took me about an hour to remove my stereo, add the module, and put everything back together.

You will not believe the sound when you hear it - it's amazing.