How do I find position?

You can do it two ways...

1: On the menu screen, >where to; >Coordinates; >Next; >Save - that will save the present location.

2: On the map screen, touch the icon representing your vehicle...and then hit Save.

Per your comment #2 touching vehicle on map screen. This is neat! does anyone know if this will work with my c330?

I found out the other day by accident, that actually you can touch anywhere on the screen and it is the location that you are at. So if you are uncoordinated (as I am) and you miss the icon, you don't have to worry, it will be the same.

On my 670 I don't have Where To "Coordinates" and I knew about the touch vehicle or screen trick. What I wanted was the coordinates and I found them by touching the Signal Strength Green Bars at the top left of screen which shows by Longitude & Latitude where you are. So I will drive there, get the coordinates, enter them in the Convertor and I will be Happy! Thanks to all those who responded.

Doug

There is also "My current Location"

On the Main screen, hit "Where to" - then, the blue box with the down arrow should be lit up...hit that...and you should see "coordinates" right above the "near" button - that's where it is on my 660...should be the same on a 670.

Oh Duh! Right where you said.
Quicker that way!

Doug

Thanks to all on getting coordinates. I was trying to do this last week when I got my Nuvi 350 (my first land GPS) and couldn't figure it out. I hate reading manuals on a computer screen and didn't want to print out all 73 pages. Besides, mend don't need instruction manuals and we never get lost!

Touching the vehicle on your screen will save that location, you can then give it a name.
your c330 will not however display the actual lat and lon for you to see, like some of the other units.

Will touching the screen on the c340 register the current location also? Wher do you find the listing so the name can be changed? I can then extract the Long/Lat using EasyDPS.

the 340 should react the same, touch the icon on the map screen, it will then save that location to "Favorites" probably with a number ie 001, 002 etc you can then select that from "Favorites" and edit/rename etc. (Looking at the manual, you will look in "Favorites" > "My Locations")

Page 9 and 11 in the manual

C340 manual

Were you able to do this? I've been looking for a way to get the lat/long of the current location on my C340, and have been frustrated.

On the c340 you can save your current location by touching where to,my locations,save then yes.Go back and edit the location so it will be easy to find later.Download Easygps.Hook gps up to computer and run EasyGps.Once screen comes up click on gps at top of page and click receive from gps.You will see the results on the screen.

Thanks for the tip. I'll have to try this out.

It will work.I use to have a c340 and used this process.