Transfer wp to Garmin gpsmap 76CSx
Tue, 11/04/2014 - 5:19pm
 |
 16 years
|
It has been a while since I loaded my gpsmap with wp (gpx), cant be done in poiloader or Mapsource. I have done it many time but forgot how to do.
Anybody out there who can bring me on the track again.
.
Are you asking about sending Waypoints from a computer to a GPSMap 76CSx?
If so, connect the GPS unit to the computer with the USB cable.
Make sure the screen on the GPS unit shows the computer connection.
Open Mapsource.
Open the file containing the Waypoints.
Click the button that is labeled "Send to Device".
I think so too
I'll check when I get home later, but I believe she is 100% on spot.
Striving to make the NYC Metro area project the best.
How stupid is a man allowed to be??
Are you asking about sending Waypoints from a computer to a GPSMap 76CSx?
If so, connect the GPS unit to the computer with the USB cable.
Make sure the screen on the GPS unit shows the computer connection.
Open Mapsource.
Open the file containing the Waypoints.
Click the button that is labeled "Send to Device".
Thanks Mama!
My fault, I have installed Franson GPS gate (a software that allows two programmes to use the same GPS receiver at the same time, quite useful).
When I hook my GPS to MapSource, MapSource won't recognize the GPS, but only "The Franzon emulator". After 1-2 days of "thinking", I found out to close the Franzon, and see what happen: Here comes the GPS in Mapsource as it used to do in the old days, piece of cake.
I have not transferred WP for the last 10 years to the GPSmap 76, therefore!
Good to have some helpful people in POI factory, thanks again Mama!
Nüvi 765T, Nüvi 1390T, Nüvi 2559 and 2695 LMT, GPS12, GPS18 (used in nRoute and Oziexplorer on laptop), GPSmap76CSx, SonyEricsson X1 (For OziExplorer CE maps)