Unflag And MapSource

 

I've discovered a small problem using the latest ver of Unflag and MapSource Ver.6.15.6.

I built 2 routes using a total of 10 VIAs. VIA0 is the starting point and VIA9 is the destination point. The other VIAs 1 thru 8 are used to shape the route using back roads for a total of a 55.2 mile route. I then invert the route so VIA9 is the starting point and VIA0 as the destination with VIAs 1 thru 8 as shaping points. When loaded into my 750 an 855 you see all the flags for the shaping points.

I now run the GPX routes thru Unflag, an load them into my 750 and 855 and now some of the flags are removed and some are still present. In the route 'VIA0 to VIA9' (Going)there are 3 flags left VIA 3,5,7. In the route 'VIA9 to VIA0'(Returning) only VIA7 is still there.

I opened the Unflagged file (GPX) in Notepad and can't see any errors.

--
"Those that stop and smell the roses, must realize that once in awhile you may get a whiff of fertilizer."..copyright:HDHannah1986 -Mercedes GPS - UCONNECT 430N Chrysler T&C - Nuvi 2598- Nuni2555 - Nuvi855 - Nuvi295W - Nuvi 750 - Ique 3600