I'm currently running version 7.29.1 and checked for the new version; it says that I'm up to date. I even tried running Express as the administrator, got the same message.
I'm currently running version 7.29.1 and checked for the new version; it says that I'm up to date. I even tried running Express as the administrator, got the same message.
... my version is: 8.0.0+7c7d7c40
(sure what all that stuff after the + is)
-- .
2 Garmin DriveSmart 61 LMT-S, Nuvi 2689, 2 Nuvi 2460, Uniden R3 radar detector with GPS built in, includes RLC info. Uconnect 430N Garmin based, built into my Jeep.
.
I'm currently running version 7.29.1 and checked for the new version; it says that I'm up to date. I even tried running Express as the administrator, got the same message.
Same thing, not being offered anything beyond Version 7.29.1+6f36140f.
I'm currently running version 7.29.1 and checked for the new version; it says that I'm up to date. I even tried running Express as the administrator, got the same message.
Same thing, not being offered anything beyond Version 7.29.1+6f36140f.
I'm on a PC and have V 8.0.0 ...., all I did was open it and check the version, it was at that level. I did try to d/l the newer map that was supposed to be but wasn't a few days ago, maybe it updated then, I did not manually d/l it myself and I am on a Windows PC v11
-- .
2 Garmin DriveSmart 61 LMT-S, Nuvi 2689, 2 Nuvi 2460, Uniden R3 radar detector with GPS built in, includes RLC info. Uconnect 430N Garmin based, built into my Jeep.
.
For quite some time the installation of GE enabled a task in the Windows Task Scheduler that automatically ran an update at 2 AM. Even if the PC wasn’t on, the update would run the next time you powered up the PC. I always disable the “auto update” because each of the log files s about 500k bytes and with only three updates a year that is just a waste of storage.
Version 8.0.0 did not enable any form of auto-update
See below on how to check for and disable the automatic check for GE updates.
FROM PREVIOUS CONTENT THAT I POSTED…This version (7.29.) of Garmin Express has reenabled the task that checks for updates at 2 AM. Even if the computer is off at 2 AM it will run the next time it is ON. To disable, go to the Task Scheduler using the command taskschd.msc. Once there expand the Task Schedule Library, the scroll down the list and locate the Garmin Updater Task. Right click the task and chose Disable. There is also a Delete option but I've never used it.
Then go to C:ProgramDataGarminLogsExpress. This is where the logs are written in Windows 10 and it is probably the same in other versions. You can safely delete all the logs, each of which take up about 500K.
I'm running on a mac and Garmin Express showed my Version as 7.29.3.0. When I checked for an update it said "You're up to date!". I went to the download site and downloaded a new binary from there and installed it. Garmin Express has been updated to 8.0.0.0. Looks like the "Check for Update" was not "working". Also the download site does not list the version which would be nice if it did. I had to download and install it in order to check to see if was actually a new update.
I'm running on a mac and Garmin Express showed my Version as 7.29.3.0. When I checked for an update it said "You're up to date!". I went to the download site and downloaded a new binary from there and installed it. Garmin Express has been updated to 8.0.0.0. Looks like the "Check for Update" was not "working". Also the download site does not list the version which would be nice if it did. I had to download and install it in order to check to see if was actually a new update.
For Windows 10, after downloading the GarminExpress.exe file, right click and select "Properties", then "Details" and it will display the version. In this case 8.0.0.
Well macOS does not have a "Properties" option but it does have something similar called "Get Info". I just tried that, but it does not display the version of the Garmin Express macOS install file which is "GarminExpress.dmg".
In any case Garmin should fix the "Check for Update" function so it works and also post the Garmin Express Version and release date on the download page for Windows and macOS.
Thanks, but!
I'm currently running version 7.29.1 and checked for the new version; it says that I'm up to date. I even tried running Express as the administrator, got the same message.
Interesting because ...
I'm currently running version 7.29.1 and checked for the new version; it says that I'm up to date. I even tried running Express as the administrator, got the same message.
... my version is: 8.0.0+7c7d7c40
(sure what all that stuff after the + is)
. 2 Garmin DriveSmart 61 LMT-S, Nuvi 2689, 2 Nuvi 2460, Uniden R3 radar detector with GPS built in, includes RLC info. Uconnect 430N Garmin based, built into my Jeep. .
Not being offered GE 8.0.0
I'm currently running version 7.29.1 and checked for the new version; it says that I'm up to date. I even tried running Express as the administrator, got the same message.
Same thing, not being offered anything beyond Version 7.29.1+6f36140f.
https://support.garmin.com/en-US/?faq=4QVp7mKSIA1LDk5fc1OHX8 indicates a version 8.0.0 is available but a manual downlead and install.
I do see some web content that indicates that an 8.0.0 version has been released on 11/10 but apparently for Mac. One site is at https://www.reddit.com/r/the5krunner/comments/1xxlg65/garmin...
John from PA
Got the 8.0.0 version
Rather than request the update from within GE I downloaded GE from the Garmin website. On running the executable I was presented with
"Windows protected your PC
Microsoft Defender SmartScreen prevented an unrecognized app from starting. Running this app might put your PC at risk."
I chose to run it anyway and did indeed get the GE 8.0.0 installed. All my devices were properly shown.
John from PA
I'm on a PC and have V 8.0.0
I'm currently running version 7.29.1 and checked for the new version; it says that I'm up to date. I even tried running Express as the administrator, got the same message.
Same thing, not being offered anything beyond Version 7.29.1+6f36140f.
https://support.garmin.com/en-US/?faq=4QVp7mKSIA1LDk5fc1OHX8 indicates a version 8.0.0 is available but a manual downlead and install.
I do see some web content that indicates that an 8.0.0 version has been released on 11/10 but apparently for Mac. One site is at https://www.reddit.com/r/the5krunner/comments/1xxlg65/garmin...
I'm on a PC and have V 8.0.0 ...., all I did was open it and check the version, it was at that level. I did try to d/l the newer map that was supposed to be but wasn't a few days ago, maybe it updated then, I did not manually d/l it myself and I am on a Windows PC v11
. 2 Garmin DriveSmart 61 LMT-S, Nuvi 2689, 2 Nuvi 2460, Uniden R3 radar detector with GPS built in, includes RLC info. Uconnect 430N Garmin based, built into my Jeep. .
A possibility…
For quite some time the installation of GE enabled a task in the Windows Task Scheduler that automatically ran an update at 2 AM. Even if the PC wasn’t on, the update would run the next time you powered up the PC. I always disable the “auto update” because each of the log files s about 500k bytes and with only three updates a year that is just a waste of storage.
Version 8.0.0 did not enable any form of auto-update
See below on how to check for and disable the automatic check for GE updates.
FROM PREVIOUS CONTENT THAT I POSTED…This version (7.29.) of Garmin Express has reenabled the task that checks for updates at 2 AM. Even if the computer is off at 2 AM it will run the next time it is ON. To disable, go to the Task Scheduler using the command taskschd.msc. Once there expand the Task Schedule Library, the scroll down the list and locate the Garmin Updater Task. Right click the task and chose Disable. There is also a Delete option but I've never used it.
Then go to C:ProgramDataGarminLogsExpress. This is where the logs are written in Windows 10 and it is probably the same in other versions. You can safely delete all the logs, each of which take up about 500K.
John from PA
Garmin Express for PC V8.0.0 (and Mac)
I'm running on a mac and Garmin Express showed my Version as 7.29.3.0. When I checked for an update it said "You're up to date!". I went to the download site and downloaded a new binary from there and installed it. Garmin Express has been updated to 8.0.0.0. Looks like the "Check for Update" was not "working". Also the download site does not list the version which would be nice if it did. I had to download and install it in order to check to see if was actually a new update.
Thanks
Thanks for the update info.
Something similar may work
I'm running on a mac and Garmin Express showed my Version as 7.29.3.0. When I checked for an update it said "You're up to date!". I went to the download site and downloaded a new binary from there and installed it. Garmin Express has been updated to 8.0.0.0. Looks like the "Check for Update" was not "working". Also the download site does not list the version which would be nice if it did. I had to download and install it in order to check to see if was actually a new update.
For Windows 10, after downloading the GarminExpress.exe file, right click and select "Properties", then "Details" and it will display the version. In this case 8.0.0.
Not sure if there is something similar for MAC.
John from PA
Re: Something Similar May Work
Thanks "John from PA"!
Well macOS does not have a "Properties" option but it does have something similar called "Get Info". I just tried that, but it does not display the version of the Garmin Express macOS install file which is "GarminExpress.dmg".
In any case Garmin should fix the "Check for Update" function so it works and also post the Garmin Express Version and release date on the download page for Windows and macOS.