Nuvi 35x7 And 35x8 Software Version 5.10

 

As of July 23, 2015

Use Garmin Express to install this file.

Changes made from version 5.00 to 5.10:

Fixed an issue that could cause traffic events to obscure the navigation map.

--
Nüvi 255WT with nüMaps Lifetime North America born on 602117815 / Nüvi 3597LMTHD born on 805972514 / I love Friday’s except when I’m on holidays ~ canuk

Thanks

Thanks!

Thanks canuk.

Installed on my 3597 ... no problems encountered.

--
Alan - Android Auto, DriveLuxe 51LMT-S, DriveLuxe 50LMTHD, Nuvi 3597LMTHD, Oregon 550T, Nuvi 855, Nuvi 755T, Lowrance Endura Sierra, Bosch Nyon

I got a problem!

Did the update, things looked fine however my 3597 will no longer connect to my computer, Express or Basecamp.

Questions

dougcutler wrote:

Did the update, things looked fine however my 3597 will no longer connect to my computer, Express or Basecamp.

Did the update complete? Does the 3597 boot up and work?

Have you tried a different USB cable and different USB port on the computer?

Try switching from MTP to MS mode, then see if it connects.

You got it!

It was the same USB cable/port that I had used to do the update. Switched to MS onetime and it connected, powered down and tried again (MTP I assume) and all is well. Very strange.

Great

dougcutler wrote:

It was the same USB cable/port that I had used to do the update. Switched to MS onetime and it connected, powered down and tried again (MTP I assume) and all is well. Very strange.

Thanks for the report.

Installed on my 3597LMTHD

Installed on my 3597LMTHD just fine.. I always keep the tab open on the right side to display 3 fields and noticed that sometimes when rotating the unit from horizontal to vertical the tab display would not format correctly after rotating the unit, and cover up much of the map.. Traffic events use the same area..

Hopefully that's the problem they fixed...

Just updated my 3597 for the

Just updated my 3597 for the sake of updating it.. Will see any impact later when I hit the road..

--
Iphone XR, Drivesmart 61,Nuvicam, Nuvi3597

Nuvi 3597 LTMHD Map Version 5.10

Before updating today to version 5.10, I was able to see the live pictures of exits from the freeway. After the update, this is no longer displayed at those same exits. I have not tried any other exits yet.
This is a cool feature that is being lost. I hope it is not the case.
This is one of the reasons I liked the GPS in the first place and if map update takes it away, then not very happy with the new version.

Well

Well there isn't any "live" pictures of exits on the 3597 but there are photoreal junction view pictures which I suspect is what your talking about. If you are talking about firmware update 5.10 then it should not have altered anything to do with the map files including the JCV file which contains all of the photoreal pictures. That file would be found in the JCV folder within the .system folder on the Nuvi.

--
Nuvi 350, 760, 1695LM, 3790LMT, 2460LMT, 3597LMTHD, DriveLuxe 50LMTHD, DriveSmart 61, Garmin Backup Camera 40 and TomTom XXL540s.

interesteng...

josamuyi wrote:

Before updating today to version 5.10, I was able to see the live pictures of exits from the freeway. After the update, this is no longer displayed at those same exits. I have not tried any other exits yet.
This is a cool feature that is being lost. I hope it is not the case.
This is one of the reasons I liked the GPS in the first place and if map update takes it away, then not very happy with the new version.

Did / have you communicated / contacted Garmin about your observation to understand the behaviour you are observing / experiencing?

--
Never argue with a pig. It makes you look foolish and it anoys the hell out of the pig!

@ josamuyi ... I'm Confused.

There are a couple of things I don't understand in your post. Your reference to version 5.10 would indicate a software update, not a map update, but you stated "map update takes it away".

Also you stated "live pictures of exits"? I don't think there is any thing that would give you "live" pictures. Did you mean the animated views of some junctions? If so, those only show if you are navigating a route. Or did you mean traffic updates?

In any case, if you performed an update on your device, you might want to try a hard reset.

Oh, by the way, welcome to POI Factory. Give us a little more information about your problem and someone here will probably be able to help you solve it.

--
Alan - Android Auto, DriveLuxe 51LMT-S, DriveLuxe 50LMTHD, Nuvi 3597LMTHD, Oregon 550T, Nuvi 855, Nuvi 755T, Lowrance Endura Sierra, Bosch Nyon

RE: @ Josamuyi ... I'm Confused.

Sorry about the confusion. I actually updated both the map and the software because as soon as I plugged the device to the PC, it alerted me that there are 3 updates available. It was after these updates that I stopped seeing the junctions pictures that I saw before (In Navigation Modes for each trip).
Hope I was able to clarify this a little.
Joel.

Interesteng...

Sure, I actually posted it on Garmin's "contact us" form before locating this forum.

Hi BarneyBadass, Sure, I

Hi BarneyBadass,
Sure, I actually posted it on Garmin's "contact us" form before locating this forum.

map update.

If you want to make sure your map update completed successfully, you can plug your nuvi into your computer and check to make sure you have the files and sizes listed in this post: http://www.poi-factory.com/comment/reply/44961/403477. These files should all have the date that you performed the map update.

If you haven't tried it yet, perform a hard reset of your devise. It is not uncommon to have wierd problems like this after an update and a hard reset often clears it up. If you are not familiar with the hard reset procedure, see this FAQ: http://www.poi-factory.com/node/30019

--
Alan - Android Auto, DriveLuxe 51LMT-S, DriveLuxe 50LMTHD, Nuvi 3597LMTHD, Oregon 550T, Nuvi 855, Nuvi 755T, Lowrance Endura Sierra, Bosch Nyon

alandb - Hard Reset

Hi Alandb,
The hard reset did it for me.
Thanks for your help.