what has changed in RLC newest file?
Fri, 12/31/2010 - 9:31pm
 |
  17 years
|
I noticed on last week and this week download when approaching a RLC the gong will sound with plenty of distance as before but the red banner doesn't display until I'm on top of the RLC or after having passed the location.
Any ideas?
Ms. POI just in case you need to know this is the location in question Anderson Rd. and Waters Ave in Tampa
the LAT/LONG from the middle of the intersection is
-82.537598, 28.025610
No change
There has been no change in the RLC file at all. If the gong and the banner don't happen at the same time, the problem is in the nuvi. The RLC file is a very simple .csv. There is no code that would control the gong and banner seperately.
dobs108
No change for that local
I noticed on last week and this week download when approaching a RLC the gong will sound with plenty of distance as before but the red banner doesn't display until I'm on top of the RLC or after having passed the location.
Any ideas?
Ms. POI just in case you need to know this is the location in question Anderson Rd. and Waters Ave in Tampa
the LAT/LONG from the middle of the intersection is
-82.537598, 28.025610
nothing has changed for that location.
Miss POI
weird
That location worked like it should until middle of December, gong and banner simultaneously, now gong but no banner until the last minute.
Tomorrow I’ll try another location near there and see what I get.
Garmin 38 - Magellan Gold - Garmin Yellow eTrex - Nuvi 260 - Nuvi 2460LMT - Google Nexus 7 - Toyota Entune NAV
not working as before
That location worked like it should until middle of December, gong and banner simultaneously, now gong but no banner until the last minute.
Tomorrow I’ll try another location near there and see what I get.
Can someone let me know what the distance in feets for the alert when you load the file on Manual using POI Loader, I may have accidentally changed the default.
Garmin 38 - Magellan Gold - Garmin Yellow eTrex - Nuvi 260 - Nuvi 2460LMT - Google Nexus 7 - Toyota Entune NAV
Distance
Do you mean express mode for Poiloader?Manual you set the distance you want.The redlight cameras will give you a 1/4 mile alert based on the word redlight in the file name.
You can touch any of the redlight camera locations on the gps screen.Right before you touch go and it will show the distance for the alert.
Speed cameras have a speed setting associated with them.Distance will be based on that setting (Prompt Distance = 36 seconds * Speed.)
I took my speed cameras and opened in Extra Poi Editor and set a distance to them.I have both speed and distance now.
Charlie. Nuvi 265 WT and Nuvi 2597 LMT. MapFactor Navigator - Offline Maps & GPS.