GPsmap 62stc missing poi's
|
12 years
|
My GPSmap 62stc EXTRA POI list will not display any POI point with a longitude between about E 30 21.278 and E 159 57.430. They are in the POI file, both .csv and .gpx but will not show on the unit’s POI list. The points were generated in Base Camp, exported to my computer, converted from .gpx to .csv and uploaded to the GPS (both .csv and .gpx files of the same data) using POI Loader.
As a side light does anyone know where to find the POI list that is in the GPS unit using Base Camp? They don’t seem to show up in Base Camp in the GPS User Data list. Below is the file I used to narrow down the longitudes for the missing files.
153.0286 -27.4658 nameBrisbane
18.33069 -34.0329 nameCape Town
159.3872 -26.8829 E name 159 23.231
159.6818 -26.8796 E name159 40.911
159.9572 -26.8912 E name159 57.430
160.2748 -26.8999 E name160 16.491
160.6006 -26.913 E name160 36.037
165.2113 -26.4491 E name165 12.675
25.60638 -33.9505 E name25 37.406
30.53112 -33.3397 E name30 21.278
31.74734 -33.3291 E name31 44.841
32.98275 -33.2481 E name32 58.965
34.08227 -33.1672 E name34 04.936
177.4402 -17.7539 nameFiji
46.31836 -15.7214 nameMadagascar
You may not see those locations
Depending on how many locations you have in the list, you will only see approximately the closest 50 to the location you are presently at.
If you do a search within the poi list then you should come up with 1 of those on the list.
Nuvi 2460LMT.
Solved for now
I only had 23 POI's entered in the Extra file so 50 was not the problem. The problem seems to be that the GPSmap62 will not list a POI that is over 5680 miles from your location (the location of your cursor). Move the cursor closer than 5680 miles and the POI will show in the list.