Garmin 25xxLMT input delay

 

Recently purchased a 2595LMT from Costco (on sale), disappointed that Garmin discontinued "Garmin Lock" on their devices, but nothing I can do about that. Anyway, when I press the address icon for input, the unit pauses for about 5 to 8 seconds before going to the input page. Does anyone else have this problem?, or maybe I have a bad unit.

Thanks

--
DriveLuxe 50, 2460LMT, 680 x 2, 3597LMTHD & 765T stolen

.

My 2595 has no delay for Where To -> Address. (Did you know you could enter the address directly into the search bar at the top of the screen?)

Do other search functions have delays? Have you taken your GPS outside yet and gotten a satellite lock? Have you installed the latest firmware (V7.90)?

You might want to give Garmin a call for more troubleshooting.

--
Nüvi 2595LMT

Thanks

Thanks for your reply, no I didn't know (address search direct at top), now I do.

Yes my unit is fully updated and receiving sat signal. I've played with it a little, and apparently, the delay only happens the first time I tap "Address", subsequent taps has no delay until the unit is rebooted, then the 1st address search delays (I timed it at 12 seconds). No other search function has any delays.

One other question, is there a way to clear my searches.

Thanks.

--
DriveLuxe 50, 2460LMT, 680 x 2, 3597LMTHD & 765T stolen

.

I was thinking about buying a 2595LMT any other problems with them

--
nuvi 2757LM-65LM-65LM

me222222222222222222

me222222222222222222

--
nuvi 250 --> 1250T --> 265T Lost my 1250T

Tap It

With your finger nail. I tried mine and it work without any delays.

--
3790LMT; 2595LMT; 3590LMT, 60LMTHD

.

bill2125 wrote:

I was thinking about buying a 2595LMT any other problems with them

I've been using mine for a couple of weeks, everything is working fine except for that weird delay, when I get a chance, I'll call Garmin about it.

Besides not having Garmin Lock, I also wish this unit has a powered clip like the 2460, very inconvenient to have to plug and unplug every time I use it.

--
DriveLuxe 50, 2460LMT, 680 x 2, 3597LMTHD & 765T stolen

lol

rthibodaux wrote:

With your finger nail. I tried mine and it work without any delays.

I'm not sure how to respond to your advice, so I have 2 versions.

1. Thank you, I tried tapping it with my "finger nail" instead of my finger, it still has that delay, any other suggestions?

2. I've tried tapping my 2595 screen with everything from a Q-tip to a hammer, but it's still has that delay, go figure.

Thanks again.

--
DriveLuxe 50, 2460LMT, 680 x 2, 3597LMTHD & 765T stolen

Garmin 25xxLMT input delay

Your Delay could Indicate that your memory is Full. If you have the max of favorites entered (1,000) your memory will be Full and almost everything will be Slow, but youy can verify that with the Factory.

--
Don Duke aka Joe Casino

Clear your Buscars (Searches)

Press RECENT (lower RHS of screen) then press the three (3) lines in Top LHS of Screen and Press "Clear"

--
Don Duke aka Joe Casino

.

jtakw wrote:

I've played with it a little, and apparently, the delay only happens the first time I tap "Address", subsequent taps has no delay until the unit is rebooted, then the 1st address search delays (I timed it at 12 seconds). No other search function has any delays.

My 2595 has the same problem! surprised

I haven't noticed it before because I very rarely turn the unit off, and rarely use an address search... not a biggie for me.

jtakw also wrote:

One other question, is there a way to clear my searches.

Where To -> Recent -> press Options (3 bars at top left of screen), then Clear

--
Nüvi 2595LMT

No Delay

No delay with ours. I am impressed that it fires up almost instantly compaired to our previous models. Didn't notice that Garmin Lock was gone. That's interesting.

--
><> Glenn <>< Garmin nüvi 2598

Same here

WAASup wrote:
jtakw wrote:

I've played with it a little, and apparently, the delay only happens the first time I tap "Address", subsequent taps has no delay until the unit is rebooted, then the 1st address search delays (I timed it at 12 seconds). No other search function has any delays.

My 2595 has the same problem! surprised

I haven't noticed it before because I very rarely turn the unit off, and rarely use an address search... not a biggie for me.

jtakw also wrote:

One other question, is there a way to clear my searches.

Where To -> Recent -> press Options (3 bars at top left of screen), then Clear

Same behavior with mine. No biggie for me though. I have it for many moons. Never did notice it, since I do not use the "Address" search any more with the 2495. Always use the global search bar straight from "Where to". It returns the results within a few seconds for most of the searches I did. I like especially the free format, e.g. "123 Main Street, Anytown, CA".

Over all, I am quite happy with it. I got mine, 2495LMTHD, from Costco(USA) website. It comes with the HD traffic as a bonus. smile

Don't think so....

donz1943 wrote:

Your Delay could Indicate that your memory is Full. If you have the max of favorites entered (1,000) your memory will be Full and almost everything will be Slow, but youy can verify that with the Factory.

I only have maybe 30 or 40 favorites saved, and after all the replies, I've come to the conclusion that it's a software/firmware problem with Garmin for this unit.

Most people probably don't even realize this problem exists because they usually don't turn the unit "off" completely.

For those reading this post, try completely turning "off" the unit by pressing and holding the power button until "Turn off the device?" shows and press "Off", then press the power button for a second to turn the unit back on, after boot up, go Where To? > Address, you'll probably get that 10 to 12 second delay before the search page shows.

I don't usually turn my unit off neither, but every time I disconnect it from the computer after updates, it is "Off" and has to be booted up again. Maybe a future software/firmware update will fix this problem, but I admit it's not that big of a deal. At least I now know I don't have a defective unit.

--
DriveLuxe 50, 2460LMT, 680 x 2, 3597LMTHD & 765T stolen

Your unit is in "Sleep" mode

gdfaini wrote:

No delay with ours. I am impressed that it fires up almost instantly compaired to our previous models. Didn't notice that Garmin Lock was gone. That's interesting.

I believe it fires up almost instantly because you didn't turn the unit off, you are just waking the unit up from "Sleep" mode.

Please read my post directly above.

Thanks

--
DriveLuxe 50, 2460LMT, 680 x 2, 3597LMTHD & 765T stolen

Clearing Search items

donz1943 wrote:

Press RECENT (lower RHS of screen) then press the three (3) lines in Top LHS of Screen and Press "Clear"

Thanks, but I didn't mean clearing the "Recent" items, I meant clearing the searches that gets saved for the search bar at the top of the main screen, and all the other buttons like "Restaurants", "Gas Stations", "Shopping", etc.

--
DriveLuxe 50, 2460LMT, 680 x 2, 3597LMTHD & 765T stolen