Created Route on PC..Xfer to Garmin... No Show
Mon, 08/20/2012 - 5:56pm
14 years
|
Hi..just created 8 routes for my trip out west.
Day 1.... send to GPS(Nuvi 465T)... Not there..
Day 2...Day 7 and so on... nowhere to be found.. I am confused as to why they are not showing up.
I have done this in the past and it worked..
What am I doing wrong
Check this FAQ
http://www.poi-factory.com/node/30986
1490LMT 1450LMT 295w
Created Route on PC..Xfer to Garmin... No Show
HI...thx
This is what it reads..
"You must import the route.Touch Tools, My Data and Import Route from File." I'm still confused??
PJG
What
What program did you use to create the routes on the PC?
Nuvi 350, 760, 1695LM, 3790LMT, 2460LMT, 3597LMTHD, DriveLuxe 50LMTHD, DriveSmart 61, Garmin Drive 52, Garmin Backup Camera 40 and TomTom XXL540s.
Tell us...
Hi..just created 8 routes for my trip out west.
Day 1.... send to GPS(Nuvi 465T)... Not there..
...
Tell us what you did to include
What program created the routes?
Exactly what buttons did you push to send the "data" to your 465T?
This was answered last year
See
http://www.poi-factory.com/node/33732http://www.poi-factory....
EDIT:Motorcycle Mama
The 465 can store 15 routes. The 255 cannot store routes.
On the 465, try Where to? > Routes > New
Then you wrote.
Thanks that does work...
1490LMT 1450LMT 295w
I think
See
http://www.poi-factory.com/node/33732http://www.poi-factory....
EDIT:Motorcycle Mama
The 465 can store 15 routes. The 255 cannot store routes.
On the 465, try Where to? > Routes > New
Then you wrote.
Thanks that does work...
I think your link should be
http://www.poi-factory.com/node/33732
Oh
Oh, a short term memory issue. Welcome to my world.
Nuvi 350, 760, 1695LM, 3790LMT, 2460LMT, 3597LMTHD, DriveLuxe 50LMTHD, DriveSmart 61, Garmin Drive 52, Garmin Backup Camera 40 and TomTom XXL540s.
Mapsource
HI...used MAPSOURCE to create the route on my PC..
PJG
Created Route on PC..Xfer to Garmin... No Show
HI.. yes Where to=>Routes=> New works if you use your Garmin..
ONE route out of 7 did appeared on my garmin 465T.
I went to MY DATA => Import Route from File and One was there..
In MAPSOURCE on my PC I used the option to SEND to my device which was recognizied by Mapsource. All 7 files that were sent said successful.
I also copied the 7 routes *.gdb to the SD card..
I can see the 7 routes on my SD CARD.
PJG
Created Route on PC..Xfer to Garmin... No Show
Hi..thanks for your patience...
In MAPSOURCE on my PC I used the option(icon).. to SEND to my device which was recognizied by Mapsource. All 7 files that were sent said successful..
PJG
Created Route on PC..Xfer to Garmin... No Show
Hi..just created 8 routes for my trip out west.
Day 1.... send to GPS(Nuvi 465T)... Not there..
...
Tell us what you did to include
What program created the routes?
Exactly what buttons did you push to send the "data" to your 465T?
Hi..thanks for your patience...
Created in MAPSOURCE on my PC I used the option(icon).. to SEND to my device which was recognizied by Mapsource. All 7 files that were sent said successful..
PJG
.
deleted
.
If you are sending them all individually, then only the last one you send is going to show.
Copy and paste all the routes into a single instance of MapSource and send them all at the same time (note that you can have multiple instances of MapSource open at the same time).
Created Route on PC..Xfer to Garmin... No Show
Hi..just created 8 routes for my trip out west.
Day 1.... send to GPS(Nuvi 465T)... Not there..
...
Tell us what you did to include
What program created the routes?
Exactly what buttons did you push to send the "data" to your 465T?
Hi..thanks for your patience...
Created in MAPSOURCE on my PC I used the option(icon).. to SEND to my device which was recognizied by Mapsource. All 7 files that were sent said successful..
Just had some thoughts...
Are the routes imported from Mapsource on a PC suppose to be in a particular Folder?
Are the routes copied to the SD Card from the PC suppose to be in a particular Folder?
INFO:
My SD card has a GARMIN FOLDER which contains another folder called GPX. In the GPX folder I find.. gpxfile112719195330.GPX
PJG
Created Route on PC..Xfer to Garmin... No Show
If you are sending them all individually, then only the last one you send is going to show.
Copy and paste all the routes into a single instance of MapSource and send them all at the same time (note that you can have multiple instances of MapSource open at the same time).
Hi.. not sure how to, but will give it a run..
THX
PJG
.
Open one route in MapSource.
One a second route in a second instance of MapSource.
Highlight the route and select COPY.
Go back to the first instance of MapSource.
Go to the route tab and select PASTE.
Repeat as needed.
Created Route on PC..Xfer to Garmin... No Show- RESOLVED
Open one route in MapSource.
One a second route in a second instance of MapSource.
Highlight the route and select COPY.
Go back to the first instance of MapSource.
Go to the route tab and select PASTE.
Repeat as needed.
HOORAY for Motorcycle Mama.. My new hero.
Et Al` .. It's wonderful when things come together because of folks like all of you who help..
Another day and I'm a bit smarter.. Looking forward to tomorrow..
Again Thank you ..
PJG
And Thanks to you
for letting us know the outcome.
Good for MM, also