WEBUPDATER

 

When I tried to do a webupdater, where it ask to find the unit. It comes back unable to find the unit, it states to change the interface option to Garmin or Hoss. How do I do that.

--
3790LMT; 2595LMT; 3590LMT, 60LMTHD

Try another usb cable....

I know from my experience sometimes the usb cable is bad--so if you have another one try that, you could also restart your computer and then try again.

NP

--
In times of profound change, the learners will inherit the earth while the "learned" find themselves beautifully equipped to deal with a world that no longer exists...

when you launch WebUpdater

When you launch WebUpdater it will look for the Garmin device that is attached to the PC via a USB cable. What it finds will be the drive letter associated with the device, e.g. GARMIN(M:\). At that point, you can click on Next and follow the prompts. If there are no updates to be found, it will then provide you with the option to look for voice updates.

This is different from POILoader where once the connection is seen, it reports back as nüvi XXX (Unit ID xxxxxxxxxx) for example.

--
"There's no substitute for local knowledge" nüvi 750, nüvi 3597

.

Use the drop-down box to go to My Computer. You should see it there, and will be able to select it.

--
nüvi 3790T | Those who make peaceful revolution impossible, will make violent revolution inevitable ~ JFK

when you launch WebUpdater

Thanks alot. I wasn't going far enough. Didn't have any updates execept for the auto and voice. Didn't need any of them.

--
3790LMT; 2595LMT; 3590LMT, 60LMTHD