Nuvi 700 series
Thu, 09/17/2009 - 11:40pm
|
14 years
|
I was wondering, how do you know that the red light information has been transferred onto the GPS? I downloaded the software from Garmin. The GPS indicated it. But, the red light info, I don't see it.
If you transfer it correctly
If you transfer it correctly to the gps using poiloader.You will find the custom pois by touching where to,extras and touching custom pois last.
Charlie. Nuvi 265 WT and Nuvi 2597 LMT. MapFactor Navigator - Offline Maps & GPS.
info/garmin 700
Thanks for the info. I'll try it.
MEP
Simulate a run through an RLC intersection
I was wondering, how do you know that the red light information has been transferred onto the GPS? I downloaded the software from Garmin. The GPS indicated it. But, the red light info, I don't see it.
If you don't have a red light camera nearby to make a test run and you want to see how your nüvi responds (and verify that you did the install correctly), put it into Simulator Mode, set your current location to be several blocks away from a known RLC point and then create a quickie route that will take you through the intersection with the RLC. As your simulated run approaches the RLC intersection, you should get an audible alert and the warning info will display near the top of the screen.
Here's a couple of links that explain this in more detail:
http://home.comcast.net/~ghayman3/garmin.gps/page3.htm#locat...
http://home.comcast.net/~ghayman3/garmin.gps/pagepoi.04.htm#...
Welcome to this site, you'll find lots of good info here and as you learn some new tricks, share them with us.
"There's no substitute for local knowledge" nüvi 750, nüvi 3597