Loading maps

 

I have a garmin c330 and want to load canada and upper states 2008 update maps to my unit and load the lower 48 states to a sd card how do i do this as would like to be able to use and view both areas.

Two Part Installation

No problem.

First, install only the lower 48 states directly to your c330.

Second, do another install and have the remaining items installed to an SD card. Not sure how much space you'll need, but 1GB and 2GB cards cost less than $30 (so get the 2GB and be done with space issues).

If you try to install both options without an SD card or both together in the same installation, you will run out of space most likely.

I found that all my settings and other stuff was saved and not changed at all by the upgrade. Cannot guarantee that for everyone, but my upgrade did not overwrite my stuff.

Good luck.

SD Card

Are you saying to put the card into the unit then download the second set of maps because the maps will not load without the unit hooked up.it says you can have one or the other as it over writes what is no the unit at the time.this is the problem.i need to be able to load the update maps to the sd card without hooking up the unit.

.

Patrick, please turn your caps lock off. It makes the posts hard to read and is considered shouting.

MAPS

sorry it is just so frustrating garmin does not seem to have any help

.

Ok, go to this thread.

http://www.poi-factory.com/node/5462

Scroll down and follow the steps listed by redbarber and shuttleman.

hi

Motorcycle Mama wrote:

Patrick, please turn your caps lock off. It makes the posts hard to read and is considered shouting.

I have edited the posts and changed the text to be sentence case.

Miss POI