can i put mile and mile per hour..permantly before i up loading to my gps

Take a look at the Help File in POI Loader.

-----------
Understanding Speed and Proximity Alert Information

POI Loader automatically scans .csv and .gpx data files for speed and proximity alert information.

You can also use Manual mode to specify default speed and proximity alert information as needed.

Speed information can be included in the file name or in the names of individual POIs within the file.

POI Loader determines speed information based on the following information, listed from highest to lowest priority:

Speed information included in the name of the individual Custom POI. For example, a POI named "SpeedZone@30" will have an alert speed of 30 regardless of the speed information specified in Manual mode or in the file name.

Speed information included in the file name. POI Loader interprets any numbers in the file name as speed information.

Proximity Alert Information

Proximity alert information can be calculated automatically based on speed information. It can also be included in .gpx data files or added in Manual mode.

POI Loader determines proximity alert information based on the following criteria, listed from highest to lowest priority:

Proximity alert information listed for individual POIs in a .gpx file. This information overrides all other proximity alert information.

Proximity alert information entered in Manual mode.

Proximity alert distance calculated by POI Loader based on speed information in the file name or in individual POI names. This calculation uses the following formula:

Prompt Distance = 36 seconds * Speed.

A default proximity alert distance of 400 meters/0.25 miles if the file name contains the word "redlight."

mama sorry i 'm still reading i dont get it

Speed information can be included in the file name or in the names of individual POIs within the file.

Speed information included in the file name. POI Loader interprets any numbers in the file name as speed information.

This means ...

If you name the file weighstation35.csv, POI Loader will set the speed alert at 35mph (or kph if that's what you use) for EVERY location in the POI file.

----
Speed information included in the name of the individual Custom POI location.

For example, a POI named "SpeedZone@30" will have an alert speed of 30 regardless of the speed information specified in Manual mode or in the file name.

This means ...

If you add @30 to the name of the individual POI locations within your file, then the speed will be set at 30 mph (or kph). You have to do this for EACH location in the POI file, but the speed settings can be different for each one if you want.

So you can set the speed at whatever you want.

ohhhhhhhhhh ok now i got it. sorry mama sometime i'm stupid!!